ENGINEERING SPECIFICATION SHEET
Processing (Flow) Rate: 1 GPM
Physical Dimensions:
Filter Canister: 12.00" wide x 19.50" tall
x 4.50" deep |
|
Pump & Motor: 4.50" wide x 5.75" tall x
4.00" deep |
|
Control Panel: 8.00" wide x 6.50" tall x
5.50" deep |
Filtration Characteristics
Total System Performance:
- Conforms to Mil Spec MIL-F-8901E.
- Capable of reducing influent water by up to 99.9% in a single pass.
- Overall sediment and moisture content can be maintained at or below .02% by
volume.
|
Coalescing with Particulate Characteristics
Coalescing:
- Type: Fiberglass
- Dimensions: 8.65" x 2.97"
- Flow Direction: Inside to Outside
- Bubble Test Point: Minimum 3.4" H20
- Gasketing & Adhesives: Compatible with Diesel Fuel
- Military Specifications: Conforms to Mil Spec MIL-F-8901E
Particulate:
- Type: Pleated Paper
- Micron Rating: 10 micron (Beta 10 = 75)
- Number Of Pleats: 35
- Pleat Height: 50"
|
Separator with Particulate Characteristics
Separator:
- Dimensions: 3" OD x 10" long
- Flow Directon: Outside to Inside
- Material: Teflon Coating on 100 mesh Stainless Steel
Screen
- Gasketing & Adhesives: Compatible with Diesel Fuel
- Military Specifications: Conforms to MIL-C-5541 (End Cap
Coating)
Particulate:
- Type: Pleated Paper
- Micron rating: 5 micron
- Number of Pleats: 37
- Pleat Height: .75"
|
Electrical Characteristics
- Voltage: 12V DC
- Enclosure: Fiberglass - Marine Rated
- Timer: Seal component with a dip switch arrangement,
auto repeating, 255 hour range with auto on/off |
Control Panel Characteristics
- Three Indicator Lights & An Alarm:
- Green: Indicates power is present
- Amber: Indicates pump is activated
- Red: Indicates high water is present
- Alarm Horn: High water also activates an alarm horn
|
Motor and Pump Characteristics
- Type: Manufactured by Carter Fuel Systems, rated for
marine use and
diesel fuel with high pressure automatic shut-off and self
priming | |
